The LG Air Conditioner Installation Plate - 3301A20020J is the correct replacement for the following model numbers.
Does this part fit my model?
Does this part fit my model?
No, This Part Does Not Fits in This Model
share :
Hurry, only parts left in stock
Keep in touch with us
Product Information
Ensure a safe, secure, and perfectly level mount for your ductless mini-split indoor unit with the LG Air Conditioner Installation Plate (3301A20020J). Serving as the critical anchor between your wall and the appliance, this sturdy metal bracket is designed to safely hold the full weight of the indoor air handler. If you are relocating your air conditioning system, or if the original mounting plate was bent, rusted, or lost during a move, this genuine replacement is absolutely essential to prevent your unit from sagging, vibrating excessively, or dangerously pulling away from the wall.
Constructed from heavy-gauge, corrosion-resistant steel, the 3301A20020J is engineered to provide unwavering structural support over the lifespan of your unit. It features a precision-stamped design with multiple pre-drilled mounting slots, allowing installers to easily align the bracket with wall studs and make micro-adjustments for a perfectly straight installation. A meticulously leveled plate is vital not only for aesthetics but for ensuring correct condensation drainage and quiet operation.
Installation / Replacement Instructions:
Safety & Planning: Turn off the air conditioner and disconnect it from power. Determine the ideal location on the wall, ensuring adequate clearance around the top and sides of the indoor unit for proper airflow.
Locate Wall Studs: Use a stud finder to locate the structural studs behind the drywall. Securing the plate to studs is highly recommended to provide a high-strength anchor point.
Level and Mark: Place the 3301A20020J plate against the wall. Set a spirit level on top of the bracket to ensure it is perfectly horizontal—this is critical to prevent water from leaking out of the drain pan. Mark the desired mounting holes with a pencil.
Secure the Bracket: Drill pilot holes at your marked locations. Use heavy-duty wall anchors and sturdy mounting screws to securely fasten the plate to the wall, double-checking the level as you tighten the screws.
Mount the Unit: Carefully lift the indoor air handler and hook the top receiver slots on the back of the unit over the upper tabs of the installation plate.
Lock in Place: Gently but firmly press the bottom half of the indoor unit against the wall until the lower retaining clips snap securely into the bottom hooks of the installation plate.
Compatible with select LG ductless mini-split air conditioner models, this OEM-quality installation plate guarantees a perfect, factory-standard mount.
Key Features:
AC Installation Plate / Bracket – Part number 3301A20020J
Secure Wall Anchor – Safely supports the full weight of the ductless indoor air handler
Heavy-Gauge Steel Construction – Resists bending, warping, and corrosion for a lifelong hold
Promotes Proper Drainage – Precision alignment ensures the unit sits level for flawless condensation flow
Vibration Reduction – Provides a rigid, flush mount to prevent operational rattling and noise
Genuine OEM Part – Engineered specifically for an exact fit on compatible LG indoor units
The LG Air Conditioner Installation Plate - 3301A20020J is the correct replacement for the following model numbers.
Ensure a safe, secure, and perfectly level mount for your ductless mini-split indoor unit with the LG Air Conditioner Installation Plate (3301A20020J). Serving as the critical anchor between your wall and the appliance, this sturdy metal bracket is designed to safely hold the full weight of the indoor air handler. If you are relocating your air conditioning system, or if the original mounting plate was bent, rusted, or lost during a move, this genuine replacement is absolutely essential to prevent your unit from sagging, vibrating excessively, or dangerously pulling away from the wall.
Constructed from heavy-gauge, corrosion-resistant steel, the 3301A20020J is engineered to provide unwavering structural support over the lifespan of your unit. It features a precision-stamped design with multiple pre-drilled mounting slots, allowing installers to easily align the bracket with wall studs and make micro-adjustments for a perfectly straight installation. A meticulously leveled plate is vital not only for aesthetics but for ensuring correct condensation drainage and quiet operation.
Installation / Replacement Instructions:
Safety & Planning: Turn off the air conditioner and disconnect it from power. Determine the ideal location on the wall, ensuring adequate clearance around the top and sides of the indoor unit for proper airflow.
Locate Wall Studs: Use a stud finder to locate the structural studs behind the drywall. Securing the plate to studs is highly recommended to provide a high-strength anchor point.
Level and Mark: Place the 3301A20020J plate against the wall. Set a spirit level on top of the bracket to ensure it is perfectly horizontal—this is critical to prevent water from leaking out of the drain pan. Mark the desired mounting holes with a pencil.
Secure the Bracket: Drill pilot holes at your marked locations. Use heavy-duty wall anchors and sturdy mounting screws to securely fasten the plate to the wall, double-checking the level as you tighten the screws.
Mount the Unit: Carefully lift the indoor air handler and hook the top receiver slots on the back of the unit over the upper tabs of the installation plate.
Lock in Place: Gently but firmly press the bottom half of the indoor unit against the wall until the lower retaining clips snap securely into the bottom hooks of the installation plate.
Compatible with select LG ductless mini-split air conditioner models, this OEM-quality installation plate guarantees a perfect, factory-standard mount.
Key Features:
AC Installation Plate / Bracket – Part number 3301A20020J
Secure Wall Anchor – Safely supports the full weight of the ductless indoor air handler
Heavy-Gauge Steel Construction – Resists bending, warping, and corrosion for a lifelong hold
Promotes Proper Drainage – Precision alignment ensures the unit sits level for flawless condensation flow
Vibration Reduction – Provides a rigid, flush mount to prevent operational rattling and noise
Genuine OEM Part – Engineered specifically for an exact fit on compatible LG indoor units
The LG Air Conditioner Installation Plate - 3301A20020J is the correct replacement for the following model numbers.
Ensure a safe, secure, and perfectly level mount for your ductless mini-split indoor unit with the LG Air Conditioner Installation Plate (3301A20020J). Serving as the critical anchor between your wall and the appliance, this sturdy metal bracket is designed to safely hold the full weight of the indoor air handler. If you are relocating your air conditioning system, or if the original mounting plate was bent, rusted, or lost during a move, this genuine replacement is absolutely essential to prevent your unit from sagging, vibrating excessively, or dangerously pulling away from the wall.
Constructed from heavy-gauge, corrosion-resistant steel, the 3301A20020J is engineered to provide unwavering structural support over the lifespan of your unit. It features a precision-stamped design with multiple pre-drilled mounting slots, allowing installers to easily align the bracket with wall studs and make micro-adjustments for a perfectly straight installation. A meticulously leveled plate is vital not only for aesthetics but for ensuring correct condensation drainage and quiet operation.
Installation / Replacement Instructions:
Safety & Planning: Turn off the air conditioner and disconnect it from power. Determine the ideal location on the wall, ensuring adequate clearance around the top and sides of the indoor unit for proper airflow.
Locate Wall Studs: Use a stud finder to locate the structural studs behind the drywall. Securing the plate to studs is highly recommended to provide a high-strength anchor point.
Level and Mark: Place the 3301A20020J plate against the wall. Set a spirit level on top of the bracket to ensure it is perfectly horizontal—this is critical to prevent water from leaking out of the drain pan. Mark the desired mounting holes with a pencil.
Secure the Bracket: Drill pilot holes at your marked locations. Use heavy-duty wall anchors and sturdy mounting screws to securely fasten the plate to the wall, double-checking the level as you tighten the screws.
Mount the Unit: Carefully lift the indoor air handler and hook the top receiver slots on the back of the unit over the upper tabs of the installation plate.
Lock in Place: Gently but firmly press the bottom half of the indoor unit against the wall until the lower retaining clips snap securely into the bottom hooks of the installation plate.
Compatible with select LG ductless mini-split air conditioner models, this OEM-quality installation plate guarantees a perfect, factory-standard mount.
Key Features:
AC Installation Plate / Bracket – Part number 3301A20020J
Secure Wall Anchor – Safely supports the full weight of the ductless indoor air handler
Heavy-Gauge Steel Construction – Resists bending, warping, and corrosion for a lifelong hold
Promotes Proper Drainage – Precision alignment ensures the unit sits level for flawless condensation flow
Vibration Reduction – Provides a rigid, flush mount to prevent operational rattling and noise
Genuine OEM Part – Engineered specifically for an exact fit on compatible LG indoor units
