LG Air Conditioner NTC Thermistor - EBG61110706

Maintain the thermal intelligence and energy efficiency of your cooling system with the LG EBG61110706 Air Conditioner NTC Thermistor. This Negative Temperature Coefficient (NTC) sensor acts as a precision thermometer for your unit’s control logic. It constantly measures the temperature—usually at the evaporator coil or the ambient air intake—and sends real-time resistance data to the main PCB. This feedback allows the system to accurately cycle the compressor, adjust fan speeds, and prevent the indoor coils from freezing. If your unit is displaying sensor-related error codes, failing to maintain the set temperature, or "short-cycling" (turning on and off too frequently), this genuine replacement is the required fix.

The EBG61110706 is built with a high-sensitivity thermal head and a moisture-resistant protective coating. This design is specifically engineered to handle the high-humidity, high-condensation environment inside an active air handler, ensuring long-term accuracy without the signal drift common in generic sensors.

1. Safety First: Turn off the air conditioner and completely disconnect it from the power source (unplug it or switch off the dedicated circuit breaker).
2. Access the Interior: Open the front intake grille and remove the air filters. The thermistor bulb is typically found clipped to the copper fins of the evaporator coil or held in a bracket in the air intake path.
3. Trace the Lead: Follow the wire from the sensor bulb back to the electrical control box.
4. Disconnect the Old Part: Open the control box cover and carefully unplug the EBG61110706 connector from the main PCB. Note the wire routing to ensure the new part is not pinched during reassembly.
5. Install the New Thermistor: Plug the new sensor connector into the dedicated port on the PCB. Route the lead wire along the original path and snap the sensor bulb securely into its designated mounting clip.
6. Reassemble and Test: Replace the control box cover, filters, and front grille. Restore power and verify that the unit accurately detects and maintains the set temperature.

1. AC Temperature Sensor (NTC) – Part Number: EBG61110706
2. Precise Thermal Feedback: Provides accurate data needed for consistent and efficient cooling performance.
3. Resolves Diagnostic Faults: Fixes common error codes caused by open/short sensor circuits or sensor failure.
4. Moisture-Resistant Design: Engineered to withstand internal condensation for high reliability.
5. Plug-and-Play Integration: Features a factory-standard connector for a secure, solderless installation.
6. OEM-Quality Part: A genuine LG replacement component calibrated to original factory resistance-temperature specifications.